HS-1000M-W2
HS-1000M-W2 is an wall-mounted dual channel gas monitor with an sounder and light for fixed gas detector.
It can check the gas concentration and alarm status by connecting to two of gas detectors installed on the site.
It is designed with 4-digit big 7 segment LED and 4 alarm LEDs, big warning light and buzzer.
Visual and audible indication will keep workers safe along with self-diagnosis function.
Features & Benefits
- Wall-mounting type
- Two of gas detector connection
- Two of 4-digit 7-segment LED
- 4 Alarm type (AL 1, AL 2, AL 3, fault)
- Buzzer, LED Lamp
- 4-20mA, alarm relay, RS-485 Modbus output
- Alarm delay setup available
- IP 65
- Non-explosion proof type
Specification
| Technical specification | |
|---|---|
| Detectable gas | Two of O2, CO, H2S, NO2, SO2, H2, LEL, etc.. |
| Display | 4 digit 7-segment high bright LED, 4xLEDs (AL1, AL2, AL3, Fault) |
| Display size | Two of 150(W)x50(H)mm |
| Detection range | User selectable (0000 to 9999) |
| Input signal | 4-20mA full scale(Power consumption 24VDC 200mA) |
| Output | 2-wire DC 4~20mA, 4x Relay contact (250VAC/5A), RS-485 Modbus |
| Alarm | AL 1, AL 2, AL 3, Fault |
| Alarm display | 4x LEDs (AL1, AL2, AL3, Fault), Buzzer(100dB@1m), Warning light |
| Power | 110 or 220 VAC(user select by switch), 50~60Hz |
| Dimension | 296(W)x260(H)x129(D)mm, 393mm(H) with warning light |
| Weight | 3.01kg |
| Housing material | ABS, IP65 |
| Operating Temperature | -20 ~ +50°C |
| Cable | Standard CVVS 14 AWG~24A WG |
| Function | Alarm delay, Buzzer Stop, Reset, Display calibration |