FGD FlameSpec IR3-HD flame detector
FlameSpec-IR3-HD flame detector providing ultra-fast response, high performance and reliable detection of a large variety of fires including hydrocarbon fires (visible and nonvisible), as well as Hydrogen fires. The detector addresses slow growing fires as well as fast eruptions of fires using improved IR3 technology. The detector operates in all weather and light conditions.
In addition, the detector provides high-definition (HD) video output of the monitored area with clear imaging of a fire event and of personnel at distances up to 100 ft (30m). This allows the rescue team to be aware of the exact situation before entering the hazardous area. The detector automatically records video of any fire event (1 minute pre- and up to 3 minutes post alarm initiation). These features, along with the built-in event logger, provide additional means to study the cause and development of fire events for "lessons learned" reviews.
Features and Benefits
- Extreme sensitivity mode – From up to 260 ft.(80m) to 1 ft2(0.1m2) n-heptane pan fire
- Ultra-fast detection mode – detection within 40 milliseconds for fireballs or explosions
- 1.3sec detection – From up to 50 ft.(15m) to 1ft2(0.1m2) n-heptane pan fire
- HD video output with automatic recording of fire events
- Data/Event logger – alarm error, other relevant events are logged to non-volatile memory
- Ethernet communication – Standard configuration
- Built-in-Test(BIT) – Automatic and manual internal self-test of window cleanliness and the overall operation of the detector
- HART 7 model available – Provides easier detector configuration and diagnostics
- Window heater to avoid condensing and icing
- Stainless Steel Tilt mounting bracket can be connected to either above or below the detector
- Individual warning levels for UV and IR
- KCs/ATEX/IECEx/FM/EAC CU TR certifications
- SIL2 certification
Specification
| Category | Item | Description |
|---|---|---|
| Fire Detection | Detection time and distance |
40ms for fast fire burst or explosion 1.5s for 1 ft2 (0.1m2) pan fire at 0–100 ft. (0–30m) 4.1s for 1 ft2 (0.1m2) pan fire at 100–230 ft. (30–70m) |
| Field of View (IR detection) | 90° Horizontal, 75° Vertical | |
| Time Delay | 0-30 seconds | |
| Built in Test | Automatic and Manual | |
| Video Functionality | HD Video | Color HD, as standard. Near IR filtered option (X2 available on request) |
| Video recording of alarm events | 1 minute pre-event and up to 3 minutes post-event | |
| System integration protocol | ONVIF (Open Network Video Interface Forum) Profile S | |
| Electrical Specifications | Operating Voltage | 24 VDC nominal (18-32 VDC) |
| Current Consumption |
Standby: 120mA Maximum: 180mA all systems in operation (including window heater) |
|
| Conduit Entries | 2x cable and conduit entries 3/4″ NPT (F) or M25x1.5 | |
| Wiring | 12-20AWG (2.5-0.35mm2) | |
| Outputs | Relays |
SPST volt-free contacts rated 2A at 30 VDC Alarm – normally open; Fault – normally closed |
| 0-20mA (stepped) current output |
3 wire and 4 wire configurations (sink and source) HART® rev 7.0 - option available |
|
| Indication | Tri-color LED (Green, Yellow, Red) | |
| Modbus | RTU compatible on RS-485 | |
| Digital (for video) | IP network IEEE 802.3 10Base-t | |
| Composite video | NTSC or PAL | |
| Mechanical specifications | Size | 5.51 x 3.54 x 3.54″ (140x90x90mm) |
| Weight |
Detector (Stainless Steel 316): 9.8 lbs. (4.4 kg) Tilt mount (Stainless Steel 316): 5.4 lbs. (2.4 kg) |
|
| Environmental Specifications | Temperature Range |
Operating : -67°F to +185°F (-55°C to +85°C) Storage : -67°F to +185°F (-55°C to +85°C) |
| Humidity | Up to 99% (RH), non-condensing | |
| Ingress Protection | IP66 & 68(2m, 24hr); NEMA 4X & 6P | |
| Approvals | ATEX |
ATEX : II 2 G D Ex db IIC T5 Gb or Ex db eb IIC T5 Gb and Ex tb IIIC T95°C Db -55°C < Ta < 75°C Ex db IIC T4 Gb or Ex db eb IIC T4 Gb and Ex tb IIIC T105°C Db -55°C < Ta < 85°C |
| IECEx |
Ex db IIC T5 Gb -50°C≤Ta≤75°C Ex db IIC T4 Gb -50°C≤Ta≤85°C |
|
| FMus & FMc |
Class I, Div. 1, Groups B, C & D; T4 Class I, Zone 1, AEx/Ex db IIC T4 Gb T4 -50°C≤Ta≤85°C T5 -50°C≤Ta≤75°C |
|
| EAC CU TR |
1Ex db IIC T5 Gb or 1Ex de IIC T5 Gb and Ex tb IIIC T95°C Db -55°C < Ta <75°C
1Ex db IIC T4 Gb or 1Ex de IIC T4 Gb and Ex tb IIIC T105°C Db -55°C < Ta < 85°C |
|
| Performance |
ANSI FM 3260 EN 54-10 |
|
| Functional safety | Complies to SIL2, per IEC 61508 - units available upon request | |
| MED | DNVGL Certificate Number MED-B-00006AM - units available upon request | |
| Accesories |
Stainless steel weather cover Flame simulator, model FLS-FSIM-UVIR-KIT 2" & 3" pole mount adapter Airshield for areas with airborne contamination Paint shield/cover |
|
| Warranty | 5 years | |